Back to:   MSDS Page   |   Cycle Finish   |   Commercial Home
 
 


MATERIAL SAFETY DATA SHEET

 

Restore Products Company                                           Date of Issue:     February 16, 1997

5170 North St. Albans

Shoreview, Minnesota  55126                                                           Product Name:   CYCLE FINISH

Phone:  651.765.0137  Facsimile:  651.765.0029                                             

 

NFPA HAZARD IDENTIFICATION SYSTEM

HAZARD RATINGS:

0=Least                                  

1=Slight                           HEALTH =              1

2=Moderate                    FIRE =                     0

3=High                             REACTIVITY =       0

4=Severe                        EQUIPMENT =      0

 

 SECTION I  -  PRODUCT DESCRIPTION

PRODUCT NAME:                                                CYCLE FINISH

GENERAL DESCRIPTION:                                    Resilient Tile Finish and Sealer

CHEMICAL NATURE:                                            Zinc Free Polymer Emulsion

PRODUCT CODE:                                                424

 

SECTION II  -  PRODUCT COMPOSITION (OSHA Listed Potentially Hazardous Ingredients)

DEG Methyl Ether, CAS# 111-77-3, < 3%, ACGIH/TLV NE, OSHA/PEL NE, VP (mm HG) .3

DPG Monomethyl Ether, CAS# 34590-94-8, < 3%, ACGIH/TLV 100ppm,  OSHA/PEL 100ppm, VP (mm HG) .1

 

SECTION III  -  PHYSICAL PROPERTIES

BOILING RANGE:                                                 100~ C Deg. C

SPECIFIC GRAVITY:  (Water = 1)                          1.0

VAPOR DENSITY AT 20C:  (MM of HG)                 Lighter than air

LIQUID DENSITY:  (Air = 1)                                   Same as water

SOLUBILITY IN WATER:                                       Infinite

SOLUBILITY IN SOLVENT:                                    Miscible

EVAPORATION RATE:                                         Slower than Butyl Acetate

APPEARANCE:                                                    Milky Light Blue liquid

ODOR:                                                                 Characteristic

PH RANGE:                                                         Mildly Alkaline

 

SECTION IV  -  FIRE AND EXPLOSION DATA

LOWER FLAMMABILITY LIMITS:  (% In Air)           Not pertinent

FLASH POINT:  (And Method)                                Not Determined

FLAMMABILITY CLASSIFICATION:                        111 B

UNUSUAL FIRE/EXPLOSION HAZARDS:               None known

RECOMMENDED EXTINGUISHING MEDIA:            Water spray, carbon dioxide, dry chemical powder

SPECIAL FIRE FIGHTING PROCEDURES:             None known

 

SECTION V  -  HEALTH INFORMATION

ACUTE TOXICITY:  Non-toxic

THRESHOLD LIMIT VALUE:  None known

EFFECTS OF OVEREXPOSURE:  Ingestion:  No effect if ingested in small amounts.  Relative to other materials a single dose of this product is rarely toxic by ingestion.  Numbness of the mouth and/or irritation of the stomach can develop following ingestion.  Eye contact:  This material may cause eye irritation.  Skin contact:  Slight redness may develop on hands and forearms if individual has a history of dermal allergic reaction.  Dermatitis and skin sensitization can develop after repeated and/or prolonged contact with human skin.  Skin absorption:  Systemically toxic concentrations will probably not be absorbed through the skin in humans.  Inhalation:  None known

OTHER EFFECTS OF OVER EXPOSURE:  None known

 

EMERGENCY FIRST AID PROCEDURES:

EYE CONTACT:  Immediately flush with plenty of water for at least 15 minutes.  If irritation persists have eyes examined and treated by medical personnel.

SKIN CONTACT:  If irritation occurs remove contaminated clothing and footwear.  Wash material off the skin with plenty of soap and water.  Wash clothing and footwear before reuse.

INHALATION:  No treatment needed.

INGESTION:  Drink water to dilute.  Induce vomiting only if advised by physician or poison control center.  Call poison control center.

 

SECTION VI  -  REACTIVITY DATA

STABILITY:  Stable under normal conditions

CONDITIONS TO AVOID:  None known

INCOMPATIBILITY WITH OTHER MATERIALS:  None known

HAZARDOUS DECOMPOSITION MATERIALS:  None known

HAZARDOUS POLYMERIZATION:  Will not occur

 

SECTION VII  -  FIRE AND SPILL/LEAK PROCEDURES

IN CASE OF FIRE:  No special precautions known

PROCEDURES IF MATERIAL IS SPILLED OR RELEASED:  Where possible flush down drain to waste treatment sewer; otherwise on small spills, use chemical absorbent and sweep up.  For large spills, contain and collect.

WASTE DISPOSAL PROCEDURES:  Dispose of this product or its residues in accordance with all local, state and federal requirements.

 

SECTION VIII  -  SPECIAL PROTECTION INFORMATION

RESPIRATORY PROTECTION:  None required for recommended use.

LOCAL EXHAUST:  Normal room ventilation.

PROTECTIVE GLOVES AND CLOTHING:  None required.

EYE PROTECTION:  None required for recommended use.  If need is determined use safety glasses or face shield.

OTHER PROTECTIVE EQUIPMENT:  As determined by or recommended by federal state or local regulations.

 

SECTION IX  -  ADDITIONAL PRECAUTIONS

No additional precautions.          

 

 

 

 

 

The information herein is presented in good faith and believed to be correct as of the date hereof.  However, Restore Products Company makes no representation as to the completeness and accuracy thereof.  Users must make their own determination as to the suitability of the product for their purposes prior to use.

No representation or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature with respect to the product or to the information herein is made hereunder. 

Restore Products Company shall in no event be responsible for any damages of whatsoever nature directly or indirectly resulting from the publication or the use of or reliance upon information contained herein.